
RAFIX 22 QR
The RAFIX 22 QR control component
range meets all the technical
requirements and current standards
for
control units. The system is of
modular design. Actuators, contact
blocks and lamp sockets can be
combined freely. This means
that you may
implement modifications
of design or configuration
even at the last minute.
An additional positive
effect is the reduction
of stockholding costs.
Sequence of assembly/disassembly at screw terminals and
cage clamp terminals
? Fix the actuator in the front panel
with the ring nut.
? Snap the individual elements (a
maximum three contact blocks or
two contact blocks together with a
lamp socket) in the coupling. You
can install them on any assembling
axis.
? Insert the lamp or LED into the lamp
socket.
Assembly
Disassembly
2
Approvals
G = approved, G = pending
Part no.
BG
zert.
VDE
0660
10/15
ULc
GL
1.20 124. – – –
1.20 125. – – –
G
G
G
G
G
G
G
G
G
G
RAFIX
22 QR
1.30 243. – – –
G
G
1.71 213. – – –
1.71 214. – – –
G
G
G
G
G
G
G
G
30.00
Panel cut-out according to
IEC 60947-5-1
All actuators are provided with a
locating lug which may be removed
using a screwdriver for installation
into mounting holes if required.
With a grid spacing of 30 mm
horizontally and 50 mm vertically,
the collars of the square actuators
touch each other. We revommend to
use the same grid spacing also for
the round collar shapes (IEC 947).
Dimensioned drawing
Control Components
2 - 97